BEK Electric motor with drive pulley securely mounted on yellow plastic base. Accepts 4mm plugs or crocodile clips.

• Maximum Recommended Voltage: 6V

BEK 3-Way Switch mounted on a yellow baseplate with sockets to accommodate the connection of 4mm plug leads. Excellent for general circuit work.

BEK Electrode Holder mounted on a yellow baseplate with sockets to accommodate the connection of 4mm plug leads. Excellent for general circuit work.

• Carbon rods available to purchase separately (B8H31092)

BEK Variable Rheostat mounted on a yellow baseplate with sockets to accommodate the connection of 4mm plug leads. Excellent for general circuit work.

Vary the current in a circuit using this rheostat. 

• Supplied with 11Ω coil.
• Recommended Voltage: 6V max.

BEK Buzzer mounted on a yellow plastic tile with connections for 4mm plugs or for use with crocodile clips.

Features the buzzer circuit symbol on top.

• Connect the positive lead to the + terminal.

BEK Bulb Holder.

The BEK Bulb Holder accepts all screw-in miniature bulbs. Mounted on a yellow plastic tile with connections for 4mm plugs or for use with crocodile clips. Features the bulb circuit symbol on top.

Packs of the following bulbs are available to purchase separately:

BEK Changeover Switch - moving the contact directs the current through different circuits. The switch is mounted on a yellow baseplate; featuring the switch symbol on top; with sockets to accommodate the connection of 4mm plug leads. Excellent for general circuit work.

This BEK Universal Clip holds components and materials for investigation.

Consists of 2 crocodile clips mounted on a yellow baseplate. Able to hold a wide variety of components.

BEK Push Switch mounted on a yellow baseplate with sockets to accommodate the connection of 4mm plug leads. Excellent for general circuit work.

Two crocodile clips (with sleeves which accept 4mm plugs) mounted on a 90mm length of tough plastic channel. Useful for holding components such as resistors; diodes etc.

• Pack of 8

BEK Single cell holder with 4mm sockets; ingeniously moulded so that a cell can only be inserted the correct way around.

• Accepts 1 x Zinc Carbon D cell (not included; available to purchase separately - B8R05412).

A BEK 4-Cell Holder is also available (B8R01324).

A comprehensive set of sixteen work cards to complement the BEK Elementary Electricity Kit (B8L12713).

The work cards cover:

• Lighting a lamp
• Brightness of a lamp
• Using a switch
• Lamps in series
• Lamps in parallel
• Lamps and switches
• Co...

Simple Circuit Modules.

These modules may be used to construct simple circuits of the type normally implemented on; for example; a Worcester Circuit Board. They are intended to introduce younger pupils (ages 11-13) to some of the more familiar applications of devices and circuits; the main ...

Replacement Rheostat Coil for the BEK Rheostat (B8H30646 - not included).

• 11Ω Coil.

Replacement 15Ω Coil is also available (B8L01053). 

Pack of three wires of for investigation of resistivity; to be held in the Universal Clip.

• Wire: Eureka (Constantan)
• 32 swg : weight 24g; length 46m; diameter 0.28mm
• 36 swg : weight 14g; length 54m; diameter 0.1mm
• 39 swg : weight 7.5g; length 61m; diameter 0.14m...

Replacement Rheostat Coil for the BEK Rheostat (B8H30646 - not included).

• 15Ω Coil.

Replacement 11Ω Coil is also available (B8H30622). 

BEK LED mounted on a yellow baseplate with sockets to accommodate the connection of 4mm plug leads. Excellent for general circuit work.

• Colour: Red
• Forward Voltage: 3V
• Maximum Current: 30mA.

BEK LED mounted on a yellow baseplate with sockets to accommodate the connection of 4mm plug leads. Excellent for general circuit work.

• Colour: Green
• Forward Voltage: 3V
• Maximum Current: 30mA.